Watercom Customer Support

[ Home | DRAINS Download | What's New | Training

PIPES & PIPES++

The PIPES program calculates flows and pressures in a pressure pipe network. Typical uses of PIPES include watermain design for subdivisions, fire mains, irrigation systems, cooling water systems, pipework and plumbing systems in buildings.

The PIPES++ program is an extended version of the PIPES program and is intended for analysis of larger town water supply systems where the user is interested in monitoring reservoir levels, pump operating times etc over an extended time period (eg 24 hours) with system demands varying with time. It also includes water quality simulation which can be used to predict how chlorine and fluoride concentrations vary with time throughout the network.

The demo version of these programs are limited to a maximum of 5 pipes. There is no limit to the size of network which the full programs will analyse.

Download PIPES

You can download the PIPES program to update an existing installation or to try out the demo version. The demo version is exactly the same as the full version except that it is limited to a maximum of 5 pipes. You will need a password to update an existing full installation. PIPES requires Windows (Windows 98 through Windows 10).  After downloading run the file Pipes_SEF.exe to install the program.
Click
here to download now (1.8 MB).

 

Download PIPES++

You can download the PIPES++ program to update an existing installation or to try out the demo version. The demo version is exactly the same as the full version except that it is limited to a maximum of 5 pipes. You will need a password to update an existing full installation. After downloading run the file PPP_Sef.exe to install the program under Windows (Windows 98 through Windows 10).
Click
here to download now (2.3 MB).
 

Download PIPES User Manual

This is the full user manual for the PIPES program.

Click here to download now (165 KB).

Download PIPES++ User Manual

This is the full user manual for the PIPES++ program.

Click here to download now (658 KB).

For further information please contact info@watercom.com.au
or Phone 612 6649 8005 (International), or (02) 6649 8005 (within Australia)